IMCPS-FR
$24,800 – $53,600
- Cutting Length 3200 mm (126 in)
- Cutting Height 80 mm (3.15 in)
IMCPS-FR is our front-loading CNC beam saw for mixed cut-to-size batches.
Product Catalog
Computer Panel Saws
CNC beam saws with optimized cutting patterns for high-volume panel processing. $21,000 – $53,600 typical factory range.
How a computer panel saw sizes a pack
A computer panel saw — also called a CNC beam saw — pushes stacked boards under a pressure beam while a main blade and scoring blade cut an optimized pattern. Software nests parts on the sheet so yield stays high. MDF, particleboard, plywood and laminates are the usual packs.
Cabinet plants, board distributors and cut-to-size services are the usual buyers. Mixed, operator-loaded batches load from the front; repeating high-volume packs feed from the rear.
Machines are commonly specified by maximum board size, stack height, pusher travel, scoring unit, label/barcode option, and 380 V three-phase electrics. Optimization software and a pressure beam are standard on production cells.
Mixed batches use front loading CNC beam saws. Continuous high output uses rear loading CNC beam saws. Flexible one-off and solid-wood sizing is the sliding table saw family.
What computer panel saws do
Optimized beam saw cutting
CNC pushers and pressure beams cut stacked panels to an optimized pattern with minimal waste. Replace this placeholder with a real machine photo when available.
How a front-load beam saw sizes mixed packs
A front-loading computer panel saw lets the operator load mixed packs from the front while a CNC pusher, pressure beam and scoring blade cut an optimized pattern. Cabinet shops and cut-to-size services are the usual buyers.
High-volume repeating packs use rear loading CNC beam saws. Flexible one-offs stay on a sliding table saw.
How a rear-load beam saw keeps packs moving
A rear-loading computer panel saw auto-feeds from the back, often with a lift table, so repeating packs keep the saw in cycle. Optimization software, scoring and a pressure beam are standard.
Mixed, operator-loaded batches stay on front loading CNC beam saws.
IMCPS-RL
$21,000 – $39,800
- Cutting Length 3200 mm (126 in)
- Cutting Height 80 mm (3.15 in)
IMCPS-RL is our rear-loading CNC beam saw for high-volume repeating packs.
Product details
Computer Panel Saws
$21,000 – $53,600 typical factory range
What a beam saw does
A computer (beam) saw cuts stacked MDF, particleboard, plywood and laminates to an optimized pattern with a CNC pusher and pressure beam. Mixed, operator-loaded batches suit a front-loading beam saw; continuous high output a rear-loading beam saw. For flexible one-off and solid-wood cutting see sliding table saws — they are not the same machine.
Before CNC and edge banding
Cut-to-size is usually first on a panel line. Parts then go to a CNC router for nesting, drilling and grooving, then an edge banding machine. Full layouts: cabinet and panel furniture production lines.
Tell us board size and shifts
Send maximum board size, stack height and how many shifts you run. Request a layout and quote, or browse installed machines.
Computer Panel Saws Technical Specifications
| Parameter | Value |
|---|---|
| Cutting Length | 3200 mm (126 in) |
| Cutting Height | 80 mm (3.15 in) |
| Main Saw Power | 11 kW (14.8 hp) |
| Carriage Speed | 0 - 90 m/min (0 -295 ft/min) |
| Control System | PC + optimization software |
| Applications | Kitchen plants / Panel furniture / Volume furniture / kitchens / Panel warehouses |
| Materials | 4×8 / 4×9 panels / Laminated particleboard / MDF / Laminated board / Particleboard |
Values are the unique figures from the catalog models in this family. A single machine page has that build's exact sheet.